| Author |
Thread |
|
Jax
Advanced Member
United Kingdom
2,676 posts
Joined: Apr, 2005
|
 Posted - 2006/09/08 : 21:07:41
just a quick question on behalf of a friend
he has an m audio 2496 (RCA out) soundcard and a set of m audio bx 8 monitors
i suggested he uses a pair of these leads ..
but then i was thinking there might be an issue becase they are mono jack plugs, and the speaker inputs are TRS which is stereo
does anyone know if there will be an issue using the mono plugs?
Alert moderator 
|
Hard2Get
Advanced Member
United Kingdom
12,837 posts
Joined: Jun, 2001
|
Posted - 2006/09/08 : 21:24:41
It shouldn't be a problem, the left output should go to the left speaker, and the right output to right one :)
Alert moderator
|
Underloop
Advanced Member
United Kingdom
3,895 posts
Joined: Mar, 2002
91 hardcore releases
|
Posted - 2006/09/08 : 21:42:39
All that happens is the tip still goes to the tip, but the sleeve gets split between the sleeve and ring input on the speaker. This si the correct way to wire a balanced to unbalanced cable anyway.
He may be better getting seperate leads though rather than those joined ones depending on where he s putting his speakers
__________________________________
"We don't stop playing because we grow old;
we grow old because we stop playing."
- George Bernard Shaw
Alert moderator
|
Jax
Advanced Member
United Kingdom
2,676 posts
Joined: Apr, 2005
|
Posted - 2006/09/08 : 22:07:51
spot on, cheers for the replys!
that pic was jsut for demonstration purposes (Cause im crap at explaining things as u know :P ) cheers for the advice though 
Alert moderator
|
StrifeII
Advanced Member
United Kingdom
2,143 posts
Joined: Mar, 2001
|
Posted - 2006/09/14 : 00:23:41
don't see why that wouldnt work to be honest.
go for it :]
__________________________________
http://www.myspace.com/strifeii
Alert moderator
|
Printer friendly
