| Author |
Thread |
|
Needforspeed
Senior Member
United Kingdom
393 posts
Joined: Apr, 2005
|
 Posted - 2005/04/24 : 20:45:50
I have some bass samples in sf2 format that got one sample for each bass tone. i need to know how to load them up on the nn-19 on reason so i can use them on the piano roll 1 sample for each tone so it sounds ok and dont need to pitch it up down...please help me guys:)
Alert moderator 
|
ryg0r
Advanced Member
Australia
2,807 posts
Joined: Aug, 2002
34 hardcore releases
|
Posted - 2005/04/25 : 05:02:54
You're in luck. I am here and good looking.
Err. Ok whatever, on to the nn19.
What you have to do is this, and its quite simple. Right click on the key zones (the bar above the keys on the nn19) and click on split key zone. Do this until you have all the keyzones you want (each key if need be as you say) then click on the blue folder to load a sample in. Once you do this find the sound font you want and load the individual thingo.
You will most likely have to change the root key, which can be done by selecting the key zone (clicky clicky) then moving the root key knob.
That should be it!! Post back if you have any other problems.
-=[ryg0r]=-
__________________________________
Visit my site at http://commandobot.com/
Alert moderator
|
Needforspeed
Senior Member
United Kingdom
393 posts
Joined: Apr, 2005
|
 Posted - 2005/04/25 : 09:21:59
thanks for trying helping me man:) but i dont understand:S ..could you try explain it easyer or maybe load up a pic to show how i got to do it?
thanks anyway
Alert moderator
|
Printer friendly
